Basic Info.
Type
Environment Testing Machine
Product Description
Usage:
Applies to wires, leather, plastic, rubber, cloth, heating changes before and after thermal properties. For wire, when classes are heated, in order to maintain the fresh air, so the special regulation of ventilation. This tester has the precision design of the air displacement adjustment device and digital voltmeter, ammeter, watt-hour meter, timer, can be used as air exchange rate determination. Horizontal forced air circulation system and the internal sides of airflow adjustment, to ensure stable internal temperature uniformity testing machine.
Standard: The instrument according to the design conforms to the UL1581sect420.9, ASTM - D2436, CNS3556, CNS742, JIS7212, JIS B7757, VDE, GB test standard requirement.
Use conditions:
1, power supply, three-phase four-wire 380 v AC 50 Hz
2, environmental temperature: 5 ~ 35 c
3, environmental humidity: 85% RH or less
Performance indicators;
1, power supply: AC380V three phase four wire system
2, power: 6.0 KW
3, the temperature range: Normal temperature + 10 c ~ 200 c
4, the control precision, plus or minus 0.5c
5, Analytical precision: 0.1 c
6, Distribution error: Plus or minus 2.5 c
7, heating time: From room temperature to 200 c, about 40 minutes.
8, the structure of the machine and material:
8.1, inner carton size: 50 cm (long) x50 cm (deep) x 60 cm (high)
8.2, carton size: 120 cm (length) x 65 cm x 134 cm (deep) (high)
8.3, in case material: SUS# 304 stainless steel, carton: The lacquer that bake.
8.4, heat preservation material: 80 mm thick high-density rock wool.
8.5, heater: Spiral tubular heater set: 380 v 6.0 KW
8.6, box for five layer structure: The outer electrostatic paint steel plate, insulation high-density rock wool on the second floor,
Three layers at high temperature electrolysis board, four layers of air ventilation and heating tube layer, five layer for the stainless steel plate.
8.7 accessory equipment
8.7. 1, no fuse switch
8.7. 2 overtemperature protection
8.7. 3, all kinds of action of light
8.7. 4, back wheel and a set of rotary motors. (back to the guy detachable, of 8 ~ 10 RPM)
A set of 4. 8.7. 5, determination of air ventilation device. (in accordance with the JISK7212 from consumption power is measured in ageing furnace is empty
Gas exchange rate, with digital wattmeter and digital TIMER)
A set of 4. 8.7. 6, ventilation size adjustment device. Ventilation is 8 ~ 200 / hour is adjustable, determined at 80 c.
8.7. 7, wide Angle projection lighting equipment.
8.7. 8, timer a: Aging time and ventilation time determination.
8.7. 9, multi-layer vacuum glass Windows.
8.7. 10, shelving a laboratory.
8.7. 11, table a TAIK to Taiwan watt hour.
8.7. 12, equipped with four locking casters.
9, supply air circulation system:
9.1, using wing centrifugal circulation fan, blower one: 1 & 220 v, 200 w
9.2, with forced ventilation, ventilation can be as high as 200 times an hour above, determine when temperature is 80 c
10, circuit control system:
10.1 electronic set by microcomputer and digital display, temperature controller (Taiwan)
10.2, this system USES the PROPORTIONAL INTERGRAL + + DIFFERENTIAL + SCR
Control + SCR (proportion, integral, differential), can improve the use life and stability of the control element interface.
10.3, PID automatic calculation function, do not need to manually set.
10.4, filaments with high precision sensor.
10.5, relay for Japan OMRON brand
10.6, timers for Taiwan's YANGMING brand
10.7, two motor for Taiwan the inscription (Taiwan)
10.8, ventilation concluded that using Japanese JIS7212 standard formula
Address:
No. 118, North District, Gaosheng Science Park, Hongtu Raod, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Instruments & Meters
Company Introduction:
Dongguan Kejian Instrument Co., Ltd. is a professional manufacturer which concentrates on all kinds of materials in testing industry. The production base is located in the national manufacturing center - Dongguan. In order to serve our customers better, we reduce costs and offer early delivery. In 2005, we set up an agency in Kunshan, Jiangsu Province. The agency is responsible for marketing and servicing of Eastern China. In this basis, our international marketing network and after-sales services system are continuously developed, and have been praised by our customers.
Most of the main components of our products are from Taiwanese and overseas famous companies. Our company has advanced production equipment and strong technical ability. At the same time, we have established long-term relationship with Beijing and Shanghai R&D departments. We have introduced some of their high technology and we develop new products continually.
We have passed ISO9001: 2008 international quality management system certification. Our series of tensile testing machines have passed the evaluation of 0.5 level accuracy sent out by Guangdong Provincial Institute of Metrology. Our company will continue to develop, innovate and keep faith. We combine international testing standards with the specific demands of customers and may establish a new banner in Chinese testing industry.